Bảng lỗi máy in T520 khổ A0 và cách khắc phục cơ bản

Ngày đăng: 14/03/2022

961 Lượt xem

0 Đánh giá

Bảng lỗi máy in T520 khổ A0 và cách khắc phục cơ bản,bang lôi may in t520 kho a0 và cach khac phuc co ban

Key Features:

- Web connectivity with HP Designjet ePrint & Share - Automatically saves copies of your work to the cloud when you print - Built-in B+/A3 tray and front-loading roll - Print documents up to 36" wide - Rely on true print previews from the driver to complete your work quickly and accurately - A1 size prints in 35 seconds - Intuitive 4.3" (109mm) colour touchscreen - HP-GL/2, 1 GB RAM, and LAN included - Built-in Wi-Fi - easily set up your printer and connect everyone in your workgroup - Prints up to 2400 dpi - achieves accurate lines and sharp details from the first print with a long-life printhead - True print previews - Sheet feed; roll feed; input tray; automatic cutter Danh Sách Error Code HP T520

>>> Hotline: 0838.35.36.37 Mr Nam - Zalo : 0838.35.36.37 mr Nam Quang Digital

+ 41.1:10: There may be a paper or carriage jam. Check and clear the paper path if necessary. If error continues may Require a Service Engineer. +(Colour) cartridge has expired: Replace the cartridge. + (Colour) cartridge is low on ink: Ensure that you have a new cartridge of the same colour ready. + (Colour) cartridge is very low on ink: Ensure that you have a new cartridge of the same colour ready.

+ 01.1:10 Restart the printer. If error continues may Require a Service Engineer.

+ 02:10 There may be a paper or carriage jam. Check and clear the paper path if necessary. If error continues may Require a Service Engineer.

+ 03.0:10 The battery of the real-time clock has expired. Require a Service Engineer.

+ 08:10 Restart the printer. If error continues may Require a Service Engineer.

+ 11:10 Restart the printer. If error continues may Require a Service Engineer.

+ 17:10 Restart the printer. If error continues may Require a Service Engineer.

+ 21.1:10 Restart the printer. If error continues may Require a Service Engineer.

+ 21:10 There may be a paper or carriage jam. Check and clear the paper path if necessary. If error continues may Require a Service Engineer.

+ 41:10 There may be a paper or carriage jam. Check and clear the paper path if necessary. If error continues may Require a Service Engineer.

+ 42.1:10 There may be a paper or carriage jam. Check and clear the paper path if necessary. If error continues may Require a Service Engineer.

+ 42:10 There may be a paper or carriage jam. Check and clear the paper path if necessary. If error continues may Require a Service Engineer.

+ 45:10 There may be a paper or carriage jam. Check and clear the paper path if necessary. If error continues may Require a Service Engineer.

+ 51.1:10 Restart the printer. If error continues may Require a Service Engineer.

+ 55:10 ? line sensor problem, Restart the printer. If error continues may Require a Service Engineer.

+ 79:04 Restart the printer. If error continues may Require a Service Engineer.

+ 85.1:10 Restart the printer. If error continues may Require a Service Engineer. + 85.2:10 Restart the printer. If error continues - Require a Service Engineer.

+ 87:10 There may be a paper or carriage jam. Check and clear the paper path if necessary. If error continues - Require a Service Engineer.

There may be a paper or carriage jam. Check and clear the paper path if necessary. If error continues - Require a Service Engineer.

+ Current job has been cancelled because roll is out of paper:
Current job has been cancelled because roll is out of paper
Load a new Roll of paper and send the job again.

+ Depleted cartridge must be replaced to resume printing.
Depleted cartridge must be replaced to resume printing.
Replace the cartridges as needed.

+ End of roll has been reached. ......
Full Error Message: End of roll has been reached. it is not possible to load the roll.
Load a new roll.

+ Ink system failure.
Ink system failure.
Requires a Service Engineer.

+ Loaded paper is too wide. Manual unload required.

Loaded paper is too wide. Manual unload required.
Remove the paper manually and load paper of the correct size.

+ Maintenance 1 advised.

Requires a Service Engineer.

+ Maintenance 2 advised.

Requires a Service Engineer.

+ Maintenance 3 advised.

Requires a Service Engineer.

+ Missing or failed Printhead.

Remove or reinsert the same printhead. Install a new printhead. If problem persists , Requires a Service Engineer.

+ Multisheet tray is out of paper .......

Full Error Message: Multisheet tray is out of paper. Load paper in multi-sheet tray and press OK to continue printing or cancel the job.
Load paper into multi-sheet tray.

+ One or more cartridges appear to be missing or damaged.

One or more cartridges appear to be missing or damaged.
Insert cartridges of the correct colour as needed.

+ Out of memory.

The printer cannot complete the job. Resend the job, selecting Send Job as Bitmap in the driver, go to the Advanced tab, then Document options > Printer features.

+ Paper jam.

Paper Jam
Refer to User Manual "The Roll has Jammed" or "The Multi-sheet Tray has Jammed". If problem persists may Require a Service Engineer.

+ Paper too far from lateral load line.

Paper too far from lateral load line.
Remove and reload the paper.

+ Paper width is smaller than min size supported

Full Error Message: Paper width is smaller than minimum size supported by the selected paper source. Load cancelled.
Remove paper and load paper of the correct size.

+ Please manually unload roll paper and try again.

Please manually unload roll paper and try again.
Rewind the roll manually.

+ Refilled or depleted cartridge detected.

Check the cartridges.

+ Single sheet is loaded with too much skew.

Single sheet is loaded with too much skew.
Press Eject to unload paper - Remove and re-load the paper.

+ Used cartridge might not have enough ink .......

Full Error Message: Used cartridge might not have enough ink to complete startup. Open ink door to replace the cartridges.
If a new printhead has been inserted without a new set of ink cartridges. Replace the cartridges not marked as new.

+ Wrong file format.

The file format is incorrect or not supported. The printer cannot process the job which will be discarded.
Call service engineer if system error code recurs.

+ You are printing a multipage job .......

Full Error Message: You are printing a multipage job. Load another sheet to continue printing or cancel the job.
Load another single sheet.

Xem thêm các sản phẩm được bán tại Nam Quang Digital Printing: